Beschreibung
Fender USA Precision Bass® Neck, 20 Medium Jumbo Frets, Rosewood Fingerboard Hals Genuine U.S.-made Fender Precision Bass® guitar maple neck features a comfortable #modern C# profile and 9.5#-radius rosewood or maple fingerboard with 20 medium jumbo frets and rolled edges. Also includes pre-slotted synthetic bone nut and Posiflex# graphite neck support rods. Tinted satin urethane finish on back for smooth feel, with gloss finish on maple fingerboard and headstock face. This replacement neck is for a Fender or Squier® by Fender bass. Specifications and Features: – Fingerboard: Rosewood – Number of Frets: 20 – Fret Size: Medium Jumbo – Neck Shape: Modern „C“ – Neck Material: Graphite Reinforced Maple – Neck Finish: Satin Urethane on Back of Neck, Gloss on Face of Headstock – Fingerboard Radius: 9.5″ (241 mm) – Scale Length: 34″ (864 mm) – Nut Material: Synthetic Bone (Micarta) – Nut Width: 1.625″ (41.3 mm) – Position Inlays: White Dot – Truss Rod: Posiflex# Graphite – 3/16″ Truss Rod Adjustment Nut (at Heel) – 4 Pre-Drilled Tuning Machine Holes with 2-Guide Pin Holes for Each Tuning Machine – Each neck is serialized and stamped during quality inspection – Fender® Logo Decal with „Made in USA“ Note: Neck is pre-drilled to accept USA Bass Tuning Machines only. Modification will be required if any other tuning machines are used. Each nut is pre-slotted with #pilot# string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.) Measurements: Peg Hole Diameter – .687# (17.44 mm) Headstock Thickness – .620# (15.74 mm) Thickness at the 1st Fret – .830# (21.08 mm) Thickness at the 12th Fret – .930# (23.62 mm)
